series pressure transmitter has the characteristics of high quality high stability, small size, low weight, compact structure, low cost and volume production It is widely used to measure pressure such as occasion of compressor, Auto, air-condition etc. The product is made of stainless steel and well-known brand sensor The special transmitter converting circuit can adjust the zero value and the full range expediently. It also has the intrinsically safe certificate the explosion proof certificate and the CE certificate.
The product is produced with military craft and has the characteristics of advanced design perfect technology, strict production superior device, superior management, perfect quality control system It has been sold in more than 40 countries.
Product Parameter:
Pressure range | 0~200kPa...60MPa | |
Pressure type | gauge (G ) | |
Overload pressure | 150%FS | |
Accuracy | 0.5%FS(typ.) ±1.0%F.S (max.) | |
long-term stability | 0.5%FS/year(typ.) 1.0%FS/year(max.) | |
temp.coefficient of zero | ±0.05%FS/°C(typ.) ±0.1%FS/°C(max.) | |
temp.coefficient of span | ±0.05%FS/°C(typ.) ±0.1%FS/°C(max.) | |
Operating temperature | -40°C~100°C | |
compensate temperature | -10°C~80°C | |
storage temperature range | -40°C~100°C | |
Medium compatibility | All corrosive medium compatible with 1Cr18Ni9Ti | |
Output signal | 4~20mA | 0.5~4.5V |
Power supply | 10~30Vdc | 5V(ratio) |
Load resistance | R≤(U-15)/0.02 (for 4/20mA) | R>100kΩ(for votage output |
Insulating resistance | >100M Ω@100V | |
electrical interface | packard,DIN43650,plug connection,cable connection,waterproof outlet | |
pressure interface | M20x1.5, G1/4,G1/2,1/4NPT, 1/2NPT,7/16-20UNF (customer request) | |
material of pressure membrane | ceramic | |
material of housing | Cr18Ni9Ti stainless steel | |
response time(10%~90%) | ≤10ms | |
shock/impact | 10gRMS,(20~2000)Hz / 100g,11ms | |
protection | IP65 | |
certification | CE ,Ex ,ROHS | |
EMC | EMI:EN50081-1/-2, EMS: EN50082-2 |