Work more efficiently with the Rosemount 3051 In-Line Pressure Transmitter, an industry standard device that delivers reliable process data. This transmitter provides accurate gage and absolute measurements and is delivered installation-ready. This pressure transmitter features an intuitive Local Operator Interface which streamlines commissioning and reduces the number of tools you need, for a cost-effective and capable solution.
Specifications
Measurement Type | Gage, Absolute |
Accuracy | Up to ±0.05% of span |
Stability | Up to ±0.125% of Upper Range Limit (URL) for 5 years |
Warranty | Up to 5-year limited warranty |
Rangedown | Up To 100:1 |
Communication Protocol | 4-20 mA HART®, WirelessHART®, FOUNDATION™ Fieldbus, PROFIBUS®, 1-5 V Low Power HART® |
Measurement Range | Up to 10000 psig (689,47 bar) Gage, Up to 10000 psia (689,47bar) Absolute |
Process Wetted Material | 316L SST, Alloy C-276 |
Diagnostics | Basic Diagnostics |
Certifications/Approvals | SIL 2/3 certified to IEC 61508 by an independent 3rd party, NSF, NACE®, hazardous location, see full specs for complete list of certifications |
Features
• | In-line gage and absolute pressure measurements support up to 10000 psi (689,47 bar) for pressure and level solutions |
• | Delivered fully assembled to manifolds or diaphragm seals for straightforward installation |
• | Intuitive Local Operator Interface streamlines commissioning for simple and cost-effective installation |
• | SIL 2/3 certified to IEC 61508 (via 3rd party) and prior-use certificate of FMEDA data for safety installations |
COPLANAR™ TRANSMITTER
The Coplanar transmitter houses a capacitance sensor with patented Saturn™ sensing technology enhancing performance to deliver industry-leading accuracy and overpressure protection. The Coplanar configuration is easily integrated with a variety of manifolds, primary elements and remote seals. Configurations deliver performance and functionality for differential pressure, true gage or absolute pressure readings.
IN-LINE TRANSMITTER
The Rosemount In-line Transmitter uses field-proven, piezoresistive sensor technology converting resistance into an electrical signal. In-line Transmitters connect directly to the process with a direct threaded connection, manifold or seal system solutions. This configuration is designed for accurate and reliable true gage or absolute pressure measurements.
MULTIVARIABLE TRANSMITTER
Multivariable Transmitters are engineered with multiple sensing elements in the same transmitter housing. An innovative design, this single device is capable of providing differential pressure, static pressure and process temperature measurements. Multivariable Transmitters are commonly used for mass flow and energy measurement applications.
PAINE SENSOR
Paine Sensors are available in a diaphragm or tube configurations. The diaphragm design consists of a wheatstone bridge with foil gages on the diaphragm with two legs in tension and two in compression and is typically used for pressures less than 5000 psi (345 bar). The tube-type sensor is designed with sets of strain wire wrapped around a pressurized tube and tied together to form a wheatstone bridge. They are generally used with pressures greater than 5000 psi (345 bar).
SUBSEA SENCORR PRESSURE SENSOR
Engineered for long-life operations in harsh subsea production environments, the Roxar subsea SenCorr sensor is a silicon piezoresistive sensor that measures pressure and temperature. Both are measured simultaneously at a common point via a standard bridge coupling, providing complete temperature compensation of the pressure reading. This sensor can also be packaged with sand erosion and corrosion sensors in the same transmitter for more complete process information.