Fuel Tank Radar Level Meter switch
Product Introduction
High Accuracy Tank Radar Level Meter/ Level Switch for Solid Level
Measuring/water solid level meter
Application: Storage containers, process vessels or strong dust and crystallization,
condensation occasion
Measuring range: 70meter
Process connection: Screw thread, Flange (optional)
Medium Temperature: -40~250°C
Process pressure: Atmospheric
Accuracy : ± 15mm
Anti-explosion/safety grade: Exia IIC T6 Ga /IP67
Signal output: 4~20mA/HART(Two-wire/ Four-wire) /RS485/Modbus
Advantages
1.Small antenna size, easy to install; non-contact radar, no wear, no pollution.
2.Almost free from corrosion, foam impact; hardly affected by the change of the temperature, pressure and water vapor in the atmosphere.
3.Severe dust environment is not likely to affect the work of the high-frequency level transmitter.
4.Shorter wavelength can achieve better reflection for the inclined solid surface.
5.The small field angle and energy concentration, enhanced echo capabilities, and beneficial to avoid interference.
6.Minimized measuring blind spot can gain better result of small tank measurement.
7.High SNR, even in the case of fluctuations can result in better performance.
8.High frequency, the best choice to measure solids and low dielectric media.
Application | All kinds of strong corrosive liquid |
Measuring range | 70meter |
Process connection | Screw thread, Flange |
Medium Temperature | -40~250°C |
Process pressure | Atmospheric |
Accuracy | ±15mm |
Frequency range | 26GHz |
Anti-explosion/safety grade | Exia IIC T6 Ga /IP67 |
Signal output | 4...20mA/HART(Two-wire/ Four) RS485/Mod bus |
03