Mass or volumetric flow monitoring of gases, liquids and steam Insertion probe lengths up to 72 inches (2 m) Accuracy: Mass flow: +/- 1.2% of reading over a 30:1 range (liquids); +/- 2.0% of reading over a 30:1 range (gas & steam) Volumetric: +/- 1.0% of reading over a 30:1 range (liquids); +/- 1.5% of reading over a 30:1 range (gas & steam) Flow range (30:1 Turndown): 10 ft/s (3.05 m/s) Velocity Minimum 300 ft/s (91.5 m/s) Velocity Maximum 1 ft/s (0.3 m/s) Velocity Minimum 30 ft/s (9.1 m/s) Velocity Maximum Liquids: Gas & Steam: Repeatability: Mass Flow Rate: +/- 0.2% of reading Volumetric Flow Rate: +/- 0.1 % of reading Temperature: +/- 0.2°F (+/- 0.1 °C) Pressure: +/- 0.05% of full scale Density: +/- 0.1 % of reading Process fluid temperature: Operating: -5°F to 140°F (-20° to 60°C) Storage: -40°F to 150°F (-40° to 65°C) 0 to 98% relative humidity, noncondensing conditions Standard: -40°F to 392 °F (-40°C to 200 °C) Ambient temperature: High temperature up to 750°F (400°C). See 241S. | Process pressure: Pressure to 1500 psig (103 barg) Optional High pressure to 5000 psig (345 barg); See 241S Response time is adjustable from 1 to 100 seconds Power supply options: 24 VDC +/-10%, 0.4 amp maximum 100 to 240 VAC, 50/60 Hz, 0.2 amps RMS at 12 W maximum |