l ain Technical Parameters
Installation | Side-Mounted | Top-Mounted | ||
Installation Interval | Stainless Steel | 500-12000mm | 500-2500mmm | |
PP | 500-4000mm | |||
Working Pressure | 0.6、1.6、2.5、4.0MPa | 0.6、1.6、2.5、MPa | ||
Medium Density | ≥0.6g/cm3 | ≥0.76g/cm3 | ||
Flange | Stainless Steel | 20-40 (DN20、PN4.0) (GB/T9119-2000) | 200-25 (DN200、PN2.5) (GB/T9119-2000) | |
PP Plastic | 20-10 (DN20、PN1.0) (GB/T9119-2000) | 200-6 (DN200、PN0.6) (GB/T9119-2000) | ||
Body Material | PP Plastic, Stainless Steel | |||
Medium Temperature | -40~80℃ 0~150℃ 0~300℃ (PP Plastic -10~60℃) | |||
Ambient Temperature | -40~70℃ | |||
Indication Error | ±10mm | |||
Medium Viscosity | ≤0.07Pa.S | |||
Upper and Lower Limit Switch Output | Sensitivity Control:10mm Output Contact Capacity:AC220V0.5A Transducer:AC220V5A Contact Life:50000 | |||
Electrical Remote Transmission Continuous Display | Accuracy:±1.5% Output Load:4-20mA时 0-500Ω Signal Output:DC4-20mA,Two-wire system Explosion-proof: iaⅡCT4 Intrinsically Safe |
Note: 1. Side-Mounted:
Stainless Steel: Measuring Range= Installation Space
PP: Indication Range= Installation Space L- 150mm
2. Installation Space (Measuring Range) Size: 500-5000mm (belonging to special orders design if longer than 5000mm)