Insert Type Electromagnetic Flow Meter

INSERTION MAG FLOW METER FOR 6" TO 72" PIPE  SIZE RANGES

Features LARGE LCD display, shows the Instantaneous Flow Rate, Total Flow, in user selectable units.

 Specifications.

• Insertion 6" to 72" Diameter pipe
• Wetted Materials Teflon & 316 SS
• Flow Body Material 304 SS
• Flows from 100 kg/h to 200,000 kg/h relative to water
• Accuracy: +/- 0.5% of reading in water.
• Lowest measuring velocity is 0.5 m/s, or 100 fpm
• Repeatability of +/- 0.05% of reading
• 1/2" to 4" 150# ANSI Flange Connections, up to 6" available custom.
• LCD Display
• Temperature:                
  • Gas: -58°F (-50°C) to 350°F (180°C)
  • Ambient: 14°F (-10°C) to 140°F (60°C)              

• Power Requirement: Order either 24 VDC or 85-220 VAC, 15 Watts maximum;   
• Output signals: Modbus RTU, 4–20 mA, and 0-10 KHz for flow rate indication
• Digital communications: Modbus RTU
• Proof Pressure 230 PSIG, 1.6 MPa.
• Display: Flow rate, Flow Rate 0-100%, and Total flow
• Wiring connection to enclosure size: M20 x 1.5
• Factory Final QC Test Certificate
• Integral Electronics installation
• Electronics Enclosure NEMA 4X / IP67
• Conductivity > 5 microSiemens/cm