Submersible Liquid Level transmitter Introduction Liquid Level Submersible Pressure Transmitter based on the measurement of the static pressure of the liquid level proportional to the depth of the liquid, and after amplification circuit converts the standard current voltage signal output,...
Availability: | |
---|---|
Quantity: | |
Submersible Liquid Level transmitter
Introduction
Liquid Level Submersible Pressure Transmitter based on the measurement of the static pressure of the liquid level proportional to the depth of the liquid, and after amplification circuit converts the standard current voltage signal output, establish output level electrical signals depth linear correlation of liquid depth measurement. In the structure, it uses waterproof wire and stainless steel housing sealed connection, snorkel in the cable with the outside world, the design of the internal structure is anti-condensation. Has good stability and reliability, and are widely used in the measurement and control of the water level in the field of environmental protection, water conservancy, power plants, urban water supply and drainage, hydrology exploration.
Application
It can be used for liquid measuring for petroleum, metallurgy, hydraulic, city water supply,
sewage treatment, hygrometry and etc.
Liquid-level testing and control in industrial process
Testing and control in Hydraulic and hydropower engineering
Building Automation System and constant pressure water supply system
Urban water supply and wastewater treatment
Liquid-level testing and control in other automation systems
Features
Various industrial standard signal output
Various electrical connector available
Certain stock for shortening delivery time
High accuracy, free of calibration
compact dimension design
Moisture-proof, anti-sweat, free of leakage troubles, IP68
Excellent resistance against impact, overload, shock and erosion
Efficient lightning protection, strong anti RFI&EMI protection
Advanced digital temperature compensation and wide working temperature scope
High sensibility, high accuracy, high frequency response and longterm stability
Technical data
Name | Data | Remark | |||
Measurement Range | 0...1…200mH2O | 1mH2O≈9.81kPa | |||
Overload pressure | 1.5 times rated pressure | ||||
Failure pressure | 3 times rated pressure | ||||
accuracy | ±0.25%F.S, ±0.5%F.S. (if higher accuracy, please refer to MARS series ) | ||||
Stability | Typical value: 0.1%F.S, Maximum value: 0.2%F.S | ||||
Operation temperature | -40℃~85℃ | ||||
compensation temperature | -10℃~70℃ | ||||
Medium compatibility | All corrosive medium compatible with 1Cr18Ni9Ti and 316L | ||||
Elec trics feature | Two-wire type | Three-wire type | |||
Signal output | 4~20mA | 0/1~5V | 0~10V | ||
Power supply | 10~30Vdc | 8~30Vdc/ac | 11~30Vdc/ac | Vdc/ac means both use dc and ac. | |
Load resistance | (U-10)/0.02(Ω) | >100kΩ | |||
Insulate | >100M Ω@50V | ||||
Electrics connector | Waterproof fixed cover + bipolar cycle matrix + sealing ring + sealgum + glue feed, etc,five rank sealed. protection rank: IP68 | ||||
Pressure junction | Various embedded structures suit to different applications 1/8, 1/4 or 1/2 | ||||
Response time | 10ms | ||||
Pressure form | Gauge pressure: G, Absolute pressure: A | ||||
Certification | Explosion proof certification, CE certification. | ||||
Electromagnetic compatibility | Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2; |
Project | Parameter | |
Standard Range | Pressure Type: gauge pressure and sealed pressure | |
Pressure Range(mH2O):0.5 1 2.5 5 10 20 50 100 200 300 400 500 600 | ||
Technical Index | Signal Output | 4~20mA 0~5VDC 0~10VDC |
Signal Line Specification | 2wire 3wire 3wire | |
Supply Voltage | 9~30VDC 9~30VDC 15~30VDC | |
Accuracy | ±0.3%FS ±0.5%FS ±1%FS | |
Zero Drift | ±0.02%FS/°C | |
Thermal Sensitivity Shift | ±0.02%FS/°C | |
Longterm Stability (1 Year) | ±0.1%FS | |
Frequency Response (-3dB) | 3.2kHz | |
Compensated Temperature | -20~+85°C | |
Medium Temperature | -10~+85°C | |
Storage Temperature | -40~+125°C | |
Overload Pressure | 200% FS | |
Medium Compatibility | Various media compatible with the 316L stainless steel | |
Environmental Protection | IP68 |
03
Submersible Liquid Level transmitter
Introduction
Liquid Level Submersible Pressure Transmitter based on the measurement of the static pressure of the liquid level proportional to the depth of the liquid, and after amplification circuit converts the standard current voltage signal output, establish output level electrical signals depth linear correlation of liquid depth measurement. In the structure, it uses waterproof wire and stainless steel housing sealed connection, snorkel in the cable with the outside world, the design of the internal structure is anti-condensation. Has good stability and reliability, and are widely used in the measurement and control of the water level in the field of environmental protection, water conservancy, power plants, urban water supply and drainage, hydrology exploration.
Application
It can be used for liquid measuring for petroleum, metallurgy, hydraulic, city water supply,
sewage treatment, hygrometry and etc.
Liquid-level testing and control in industrial process
Testing and control in Hydraulic and hydropower engineering
Building Automation System and constant pressure water supply system
Urban water supply and wastewater treatment
Liquid-level testing and control in other automation systems
Features
Various industrial standard signal output
Various electrical connector available
Certain stock for shortening delivery time
High accuracy, free of calibration
compact dimension design
Moisture-proof, anti-sweat, free of leakage troubles, IP68
Excellent resistance against impact, overload, shock and erosion
Efficient lightning protection, strong anti RFI&EMI protection
Advanced digital temperature compensation and wide working temperature scope
High sensibility, high accuracy, high frequency response and longterm stability
Technical data
Name | Data | Remark | |||
Measurement Range | 0...1…200mH2O | 1mH2O≈9.81kPa | |||
Overload pressure | 1.5 times rated pressure | ||||
Failure pressure | 3 times rated pressure | ||||
accuracy | ±0.25%F.S, ±0.5%F.S. (if higher accuracy, please refer to MARS series ) | ||||
Stability | Typical value: 0.1%F.S, Maximum value: 0.2%F.S | ||||
Operation temperature | -40℃~85℃ | ||||
compensation temperature | -10℃~70℃ | ||||
Medium compatibility | All corrosive medium compatible with 1Cr18Ni9Ti and 316L | ||||
Elec trics feature | Two-wire type | Three-wire type | |||
Signal output | 4~20mA | 0/1~5V | 0~10V | ||
Power supply | 10~30Vdc | 8~30Vdc/ac | 11~30Vdc/ac | Vdc/ac means both use dc and ac. | |
Load resistance | (U-10)/0.02(Ω) | >100kΩ | |||
Insulate | >100M Ω@50V | ||||
Electrics connector | Waterproof fixed cover + bipolar cycle matrix + sealing ring + sealgum + glue feed, etc,five rank sealed. protection rank: IP68 | ||||
Pressure junction | Various embedded structures suit to different applications 1/8, 1/4 or 1/2 | ||||
Response time | 10ms | ||||
Pressure form | Gauge pressure: G, Absolute pressure: A | ||||
Certification | Explosion proof certification, CE certification. | ||||
Electromagnetic compatibility | Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2; |
Project | Parameter | |
Standard Range | Pressure Type: gauge pressure and sealed pressure | |
Pressure Range(mH2O):0.5 1 2.5 5 10 20 50 100 200 300 400 500 600 | ||
Technical Index | Signal Output | 4~20mA 0~5VDC 0~10VDC |
Signal Line Specification | 2wire 3wire 3wire | |
Supply Voltage | 9~30VDC 9~30VDC 15~30VDC | |
Accuracy | ±0.3%FS ±0.5%FS ±1%FS | |
Zero Drift | ±0.02%FS/°C | |
Thermal Sensitivity Shift | ±0.02%FS/°C | |
Longterm Stability (1 Year) | ±0.1%FS | |
Frequency Response (-3dB) | 3.2kHz | |
Compensated Temperature | -20~+85°C | |
Medium Temperature | -10~+85°C | |
Storage Temperature | -40~+125°C | |
Overload Pressure | 200% FS | |
Medium Compatibility | Various media compatible with the 316L stainless steel | |
Environmental Protection | IP68 |
03