Flow measurement · steam, gas & liquid
Measures steam, gas and liquid by the frequency of vortices shed from a bluff body. No moving parts, good for high-temperature steam and utility metering. We size the meter to your actual operating pressure and temperature.
Technical summary
| Item | Typical specification* |
|---|---|
| Nominal diameter | DN15 – DN300* |
| Accuracy | ±1.0% of reading (liquid) / ±1.5% (gas, steam)* |
| Measured medium | Saturated / superheated steam, gas, liquid |
| Process temperature | up to 350 °C (high-temp version)* |
| Output signal | 4–20 mA · pulse · HART · Modbus* |
| Power supply | 24 VDC · 220 VAC · battery* |
| Sensor material | 316L · Hastelloy* |
| Connection | Flange · wafer · threaded* |
| Protection | IP67* |
| Explosion protection | Ex version available* |
| Compensation | Pressure / temperature compensation option* |
* Typical values for reference. Final range, materials, accuracy and approvals are confirmed per model against your steam/gas conditions. Datasheet provided on request.
A bluff body placed in the flow creates alternating vortices downstream; their frequency is proportional to flow velocity. With no moving parts, the meter holds up well in steam and utility service and needs little maintenance.
Steam and gas sizing needs pressure and temperature — include them if you have them.
FAQ
Electromagnetic is for conductive liquids. Vortex is for steam, gas and clean liquids regardless of conductivity. See the selection guide.
Both operating pressure and temperature — they determine steam/gas density and therefore the meter size and range.
Yes, with the high-temperature version. Tell us the exact temperature and we will confirm the configuration.
Yes. Upstream and downstream straight lengths are required; we include the installation note with the datasheet.