Sanitary Type Electromagnetic Flow Meter

MAG FLOW METER, 1/2", 1", 2", 3", 4", 6", 8" & 12" ANSI PIPE FLANGE SIZE RANGES

MAG FLOW METERS AT THE PRICES OF HIGH-END CLAMP ON ULTRASONIC FLOW METERS AND FEATURE ACCURACIES OF 0.5% OF READING. 
AMAZING SENSITIVITY FOR CONDUCTIVITY REQUIRING A MINIMUM OF  5 MICROSIEMENS/CM (COMPARED TO MORE THAN 20 MICROSIEMENS/CM REQUIRED FOR COMPETITORS)

DISPLAY

Features LARGE LCD display, shows the Instantaneous Flow Rate, Total Flow, in user selectable units.

 Specifications.

• Electrode Material: 316L SS

• Wetted Materials Teflon, 304 SS, & 316 SS

• Flow Body Material 304 SS

• Flow Velocity .01 - 15 m/s Nominal 0 - 3 m/s

• Accuracy: +/- 0.5% of reading in water.

• Repeatability of +/- 0.15% of reading

• 1/2" to 4" 150# ANSI flange connections, up to 8" available.

• LCD Display

• Temperature:                

• Liquid/Gas: 14°F (-10°C) to 350°F (180°C)

• Ambient: 14°F (-10°C) to 140°F (60°C)              

• Power Requirement: 24 VDC  20 Watts maximum;   

• Output signals: Modbus RTU, 4–20 mA, and 0-10 KHz for flow rate indication

• Digital communications: Modbus RTU

• Proof Pressure 1.6 MPa, 230 PSIG.

• Display: Flow rate, Flow rate 0-100%, and total flow

• Wiring connection to enclosure size: M20 x 1.5

• Factory Final QC Test Certificate

• Integral Electronics

• Electronics Enclosure: IP65

Magnetic flow meters (MAG flow meters) are volumetric flow meters that operate without any moving parts and are ideal for potable water and wastewater applications as well as ideal for any conductive or water based clean or dirty fluid.  Magnetic flow meters will generally not work with hydrocarbons, distilled water, and many non-aqueous solutions as they require a conductive fluid of 5 microSiemens/cm minimum.